Projects / Personal / 2026

Pico MixPad

A USB controller for setting Windows volume per application.

GAMEMIC MUTED mic app 1app 2app 3app 4master mic
The top plate: display and mic light, four app knobs, the main volume knob and eight keys.

I wanted a quicker way to balance game, voice chat and music than opening the Windows volume mixer, so I built a controller for it. It has a main volume knob, four knobs for individual apps, eight mechanical keys and a small screen that shows what each knob controls. Pressing any knob mutes it, and one key mutes the microphone.

How it works

The pad connects over USB and appears as a keyboard, a media controller and a serial port at the same time, so the main volume knob and media keys work on any computer with nothing installed. A Python app on the PC adds per-app control through the Windows audio API and talks to the pad over a simple text protocol I designed.

The firmware is written in CircuitPython, and the Pico's programmable I/O reads the knobs in hardware so no steps are missed. The knobs send how far they were turned rather than a fixed position, so changing a volume in Windows never fights the hardware. The desktop app has 11 unit tests that run without the pad attached.

Serial messages

FromMessageMeaning
PC?Is a pad connected?
PadHELLO MACROPADYes, with its version
PadE ch deltaA knob was turned
PadP chA knob was pressed
PCV ch vol muted labelWhat to show for a knob
PCMIC 1|0Mic state, for the light

The PC repeats the full state every second. If the pad hears nothing for five seconds, it carries on as a plain volume controller.

What's next

A custom circuit board with hot-swap key sockets instead of hand wiring, and a C++ version of the desktop app to replace the Python one.